Loading... Please wait...

security banner

Our Newsletter


Fuel Filter Housing

  • Fuel filter housing - FA2
RRP:
$147.95
Your Price:
$137.50 (inc GST) $134.50 $125.00 (exc GST) (You save $10.45)
SKU:
FA2
Brand:
Weight:
3.00 KGS
Shipping:
$12.00 (Fixed shipping cost)
Quantity:


$137.50 (inc GST) $134.50 $125.00 (exc GST)">

In-Line Fuel Filter Housing and Replacement Filters

The FA2 fuel filter is ideal on fill lines when filling fuel tanks or storage tanks. The unit can be used for regular grades of petrol, diesel and Ethanol only. It is not recommended to use this filter on fuel that contain additives.The full fuel filter assembly unit includes the PF10 filter for diesel fuel as standard. This filter is supplied as standard on the Alemlube 5080A High Volume Rotary Drum Pump and Filter.

warranty.jpg

Replacement filters without complete housing assembly can be ordered individually.

CLICK OPTIONS ABOVE TO ORDER INDIVIDUAL FILTERS UNITS

PF10 FILTER ONLY- Diesel
PF10CS FILTER ONLY - Unleaded

 

Maintaince Advice:

  • Attach filter to storage tank fitting on inlet marked “IN”. Attach hose and nozzle to filter opening marked “OUT”.
  • Do not exceed 100PSI internal pressure on unit.
  • Do not tighten filter cap using the filter bowl for leverage.
  • Apply wrench to flat surfaces in center part of filter cap ONLY to tighten or remove. See illustration
  • Apply a coat of clean oil to the FA2N Gasket when installing the filter on the tank and each time the plastic bowl is removed. This will help to insure a better seal between the cap and the bowl.
  • Visually check filter element for replacement. Change filter element when dirty or when flow is restricted. To replace filter element, unscrew filter bowl and unscrew filter element and replace. Hand Tighten Only.
  • Install a shut-off valve between tank and filter and keep closed except when withdrawing fuel. This unit is not to be used unattended for safety reasons.
  • When replacing filter element, always use a PF10N element only.

 

FA2 Parts Diagram

fa2-assembly.png

 


Warranty Information

Your Alemlube product is warranted to the original user against defects in workmanship or materials under normal use for a period of twenty four months* after purchase date. Any products which is determined to be defective in material and workmanship and returned to Alemlube P/L, shipping costs prepaid, will be repaired or replaced at Alemlube’s option.
This warranty also covers parts that are subject to wear such as O rings, packings, seals, springs, electronic and even electrical components.
The warranty does not cover damage or failure which in the judgement od Alemlube arises from misuse, abrasion, corrosion, negligence, accidental damage, faulty installation or tampering. If Alemlube inspection discloses no defect in material or workmanship, repair or replacement and return will be made at customary charges.

Find Similar Products by Category


Customers Who Viewed This Product Also Viewed

Related Products

You Recently Viewed...